Shuttering Magnet for Precast Formwork Introduction.
Shuttering Magnet eelbetooni vormimine
mechanical loads with a hammer were required, which destroy the surface of the expensive
formwork tables and fragile neodymium magnet as well.

In order to facilitate the precast concrete formwork industry, NBAEM is developing and manufacturing our own shuttering magnet to solve this problem successfully.
Meie katjakinnitusmagnet on tuntud ka kui nupu magnetid ja magnetilised kastid. See koosneb metallkestast, magnetilisest süsteemist ja tõhusast tööriistast sisse- ja välja lülitamiseks, mis tagab kiire toimimise ning parandab töökindlust vormimise üles seadmise ja eemaldamise ajal. Kohandatavate adapteritega pakub katjakinnitusmagnet ideaalse lahenduse peaaegu kõikide ehitus- ja eelvormitud betooni vormimistoite ning puidust, alumiiniumist ja terasest vormide jaoks.
The NBAEM shuttering magnet have an automatic system to activate and deactivate the magnetic field. By application of this precast magnet box, the working time and cost will be reduced and the same workers could produce more concrete walls in a shorter time. Under the same artificial conditions, the use of the shutter magnet system can increase the production capacity by 7 times

Key Benefits Of Shuttering Magnets:
1.Easy installation and effortless operation. Your workers could choose a fixed position at will and quickly build concrete formwork according to individual architectural design. Significantly save complexity and time and cost on the installation of magnetic formwork (up to 70%).
2. Universal use for mass production of concrete products, and piece different shape and size concrete elements of all forms on the same steel table. Excellent applicability, the same prefabricated formwork magnet can be adapted to different concrete formworks. You do not need to have a lot of different forms for different products. The same magnet can be used for different purposes and in different ways. You only need a set of magnets, adapters for different height boards, and a steel table. Your workers could contemporaneously build different concrete formworks at one time; even during the building process, your workers could adjust the concrete formwork.
3. Integrated threaded holes M12 and M16 to adapt formwork and customized adapters, to fix all kinds of side-formwork including wood, steel, and aluminum formworks, eliminates the need for welding, shuttering magnets does not damage the steel table. Avoid welding or bolting to the formwork table therefore preserving surface finish and reduce direct damage to the concrete platform in the working.
4.No welding process is required, and the magnetic force of the magnet can be used to fit the template. Avoid welding or bolting to the formwork table therefore preserving the surface finish. No need for electric welding, you can save high energy consumption.
5.10-Year-long service life and reusable, low cost, short payback period.

Structure and Elements of Shuttering Magnets:
The Shuttering magnet assembly consists of steel Casing and fixing screws and a switchable magnetic block or magnetic core (certain designed magnetic circuit) which is made of some strong neodymium magnets and steel plates.
This magnetic core provides very much strong adhesive force to the precast concrete tables. There is a control ON/OFF button on the top of the shuttering magnet, to open or close the magnetic power.

NBAEM Insert Magnets, also called embedded magnet .
NBAEM-i sisestusmagneetide seeria on mõeldud ja arendatud mitmesuguste eelvormitud betooni sisestusosade jaoks. Eelhase tootmisprotsessi ajal peame sisestama erinevaid lülitiavasid, kolvialuseid ja ühendus- või tõstetubasid.
Kasutades meie sisestusmagneete kinnitamiseks sisestusosi, tagavad magnetid osade vastu libisemise ja nihkumise. Meie toode on vastupidav, kulusäästlik, lihtne kasutada ja tõhus.

Insert Magnet for PVC Sealing Section

This insert magnet is designed to fix the sealing section when we produce the precast concrete.
This item can be used for a long time and works easily, so we can save costs during making the wall panels. Once it is positioned, it stands tightly, no-slip, as with much strong adhesive force onto the platform.
We have the size D150, D110, D75, D45, etc, we can see in the middle of the product is a screw, it is circled by thick nylon, of course, all the products accept customized, each customer have different kinds of requirement, we will do our best to reach your demand.

Circular Wire Box Insert Magnet

The insert magnet for the circular wire box is designed to leave the wire box hole when making precast concrete components. This embedded magnet is made of hard nylon and good quality magnet. Nylon rods are used for processing and forming, which can be flexibly customized according to customer needs, and used with powerful magnets to make the components more beautiful.
It is the settled shape and size, therefore, your demand must custom it, it is easy for us no matter drawing or sample because we are good at the magnet field design and make it true.

Insert Magnets with an external thread is designed for fixing embedded threaded bushing in precast concrete production.

Our products reach the standard, and according to your demand, we can match the thread, including M10, M12, M14, M16, M18, etc. all of the thread will be used the good quality steel, you can check the quality that providing you free samples.
At the bottom of the insert magnet, you can find the black glue, it is made the circle shape and tightly connected, so the magnet that in the middle of the body can keep catching up the metal body, all the metal body, and magnet surface will keep clean and no scratch, it is our products Consistent standard, so you do not worry, you can try to contact us even if as a reference supplier, we will do our best to service for you, welcome to visit our factory, and showroom will be opened any time.

What is Magnetic Chamfer?
Terasest soonkall on üks kasulikumaid ja sagedasemaid lisatarvikuid eelvormitud betooni tööstuses.
Magnetiline soonkall öeldakse laialdaselt terasest kattejate pinnadele ja terasest laudadetele kinnitamiseks eesmärgiga:
· Kiire ja puhas nurkide, viiludatud äärte, tilkumismugulad, dopli jne moodustamine ning konverentsid ja avad betoonseinpadide ja mõnede vormimistabelide nurgade ja pindade peal.
· Vältida betooni ületäitumist vormimise laua ja kõrvalvormi vahelt.
· Ja vältida puurimist või keevitamist laual või vormil. Ja lõpuks parandab eelvormitud betooni elementide tootmisaegu ja tööjõu kulu.

Magnetic Chamfer Features:
1. High Quality, Reusable, durable for more than 3 years at least service life, ensure a nice payback on the original investment. Save money.
2. Powerful magnets are embedded at the surface of the chamfer to provide maximum adhesion to any steel surface. For example, single side magnetic steel chamfer offers more than 100KG per meter strength. It won’t be pulled out under normal use.
3. Rubber magnetic chamfer, both sides magnetized, and Steel Magnetic chamfer available in single-side magnetized (50% magnet) or both-side magnetized (100% magnet).
4. Easy to operate, quick to position, remove, and clean, quick, and accurate positioning exact beveled chamfers on the construction steel formwork table, and shortening the production timeline.
5. No open grooves to fill with the concrete.   Securely, no screws, bolts, or welding are necessary, therefore preserving surface finish to increase the lifetime
6. Both magnetic trapezoidal and triangular chamfer strips available for clean chamfers and joints.

According to the material of the product, magnetic chamfer can be divided into three types:
1. Rubber Magnetic Chamfer (Most Flexible)
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits